1. Home
  2. Reviews
  3. UGREEN Nexode 140W

Review · PD 3.1 / EPR · 140W class

UGREEN Nexode 140W: the value route to a 28V rail.

140W of shared budget with a genuine PD 3.1 rail behind it: on the spec, the cheapest credible way to fast-charge a 16″ MacBook Pro from a multi-port charger — and a large object on your desk in exchange.

The specification, as published

AttributeWhat the spec commits to
Rated output140W total, shared
Port countTwo or three by SKU — commonly 2× USB-C plus 1× USB-A; all-C variants exist
ProtocolUSB-C PD 3.1 / EPR with a 28V rail (28V × 5A = 140W), plus 5V/9V/15V/20V rails and a published PPS range
Form factorLarge GaN brick; higher-wattage UGREEN units often use a detachable AC cord, not folding prongs
Cable requirementA 240W EPR-rated 5A e-marked cable for anything above 100W
Notable featurePer-combination allocation table published — it matters more at this tier than any other

Confirm the 28V profile in the listing before buying. "140W" appears on chargers that reach it only as a total across ports, capping any single port at 100W — a different product. A real EPR unit prints a 28V line in its output block.

What it is genuinely good at

Fast-charging a 16″ MacBook Pro. That machine asks 140W over the 28V rail, and no allocation cleverness on a PD 3.0 charger substitutes for voltage. A binary capability, not a matter of degree.

Keeping a big laptop high while other devices charge. A 96W laptop contract plus a phone and earbuds fits inside 140W without the laptop dropping tiers — the arithmetic that fails at 100W.

Where it falls short, and who should skip it

Size and cord. The least travel-friendly shape in the Nexode range: a detachable AC cord means two objects, no folding prongs and a real footprint on a power strip. A 65W unit goes in the bag; this stays on the desk.

The EPR cable requirement is absolute. Without a 240W-rated cable the 28V rail never appears and you own a very large 100W charger; budget for it too. See e-marked cables explained.

Skip it if nothing you own asks for 28V. A 14″ MacBook Pro, any MacBook Air and essentially every ultrabook are covered by 100W adapters, cheaper and smaller. Paying for a rail you never negotiate is the common overbuy here.

Device fit: what it actually serves at full speed

DeviceAt full speed?Detail
MacBook Pro 16″Yes, with a 240W EPR cableThe 28V/140W profile is why the tier exists
MacBook Pro 14″Yes67–96W, well inside the budget
Mobile workstation / gaming laptopUsuallyMany sit at 100–130W over USB-C; check the rated input
Galaxy S25 Ultra at 45WWith a published PPS rangePD 3.1 and PPS are separate features — verify both
Laptop plus phone plus tabletMostly140W absorbs the combination that breaks a 100W unit

This unit, and the honest alternatives

  • 140W

    UGREEN Nexode 140W

    The unit under review: PD 3.1 with a 28V rail and a published allocation table — the value route in.

    Output
    140W total
    Standard
    PD 3.1 / EPR
    Ports
    2-3
    Needs
    240W EPR cable
    Check price on Amazon
  • Alt

    Anker Prime 140W

    The same rail in a more compact, better-documented body, usually for more money. Choose it if footprint matters

    Output
    140W total
    Standard
    PD 3.1
    Ports
    3
    Trade-off
    Price
    Check price on Amazon
  • 100W

    UGREEN Nexode 100W

    The right downgrade if nothing you own asks for 28V: four ports, cheaper cables, smaller brick

    Output
    100W total
    Ports
    3× C, 1× A
    Standard
    PD 3.0
    Best for
    14″ and below
    Check price on Amazon
Read the output block for a 28V line. A genuine PD 3.1 charger prints something like "28V⎓5A" beside its 5V, 9V, 15V and 20V rails. If a listing claims 140W but the housing photo tops out at 20V, that 140W is a shared total; no single port will fast-charge a 16″ MacBook Pro.

Related reading

Up: all adapter reviews. Class: 140W power adapters. Brand: UGREEN chargers. Siblings: Nexode 100W, Anker Prime 140W, Apple 140W USB-C. Background: 240W USB-C and EPR.

FAQ

What makes 140W possible when USB-C used to stop at 100W?

PD 3.1 Extended Power Range, which adds 28V, 36V and 48V rails above the original 20V maximum. 140W is 28V at 5A.

Do I really need a new cable for 140W?

Yes. No e-marker chip caps a cable at 3A, and a 100W e-marked cable is certified only to 20V. Without a 240W EPR cable the charger falls back to a 100W-class contract.

Is the Nexode 140W worth it over the 100W model?

Only if you own a device that requests 28V — in practice a 16-inch MacBook Pro. For a 14-inch machine or any ultrabook the 100W model is smaller, cheaper and gives up nothing.